Walk the plant. The report writes itself.

Operator rounds for water and wastewater treatment plants, on iPhone, iPad and Android, and in the browser. Every reading is saved as it’s taken, signal or not, and the report reaches the chief operator when the round is done.

Start a free trial

15 days free, with no card to enter. See pricing

  • Download on the App Store
  • Get it on Google Play
Today in the console: Meridian WTP's sign in orange for a leak, the open leak at RW-2, not assigned, and the last 24 hours of rounds: one due, one missed, and one done with a leak and a SCADA mismatch (opens the full-size screenshot)A checkpoint on the iPhone: RW-2's sign turned orange with LEAK, the open drip it's already being followed as, and the pump on (opens the full-size screenshot)
The console’s Today and the app on an iPhone, at the same plant. Sample data.

On the phone, walking the plant

The plant walkthrough your operators already do, as a route of checkpoints. Each checkpoint is a sign, laid out the way your plant set it up: equipment status, readings against your own limits, and the leak check, with buttons big enough for a gloved hand. No signal in the pump room? Every reading is saved on the phone and sent once there’s a connection, minutes or hours later. The round you’re walking stays on the Lock Screen, and supervisors can add a widget for open issues and missed rounds. How to use ShiftRounds walks through every screen.

  • RW-2 on the iPhone: the sign orange with LEAK, the open drip at the top, seen on 5 rounds, and status On (opens the full-size screenshot)

    Every checkpoint is a sign

    Answer Leak, and the sign turns orange and asks how bad. Under each reading: the last one, the change, and what’s expected.

  • The reading keypad on the iPhone: 62 psi typed and shown in yellow as Out of range, with the last reading 56 and the expected 45 to 60, above large number keys and Save, then Run hours (opens the full-size screenshot)

    A keypad for gloves

    Big keys, never the phone’s keyboard. A reading is checked against your limits as it’s typed, so a slip shows before it’s saved.

  • The route on the iPhone: SCADA, 1 of 12 read, then each area's checkpoints in walk order, with RW-1 done and RW-2 highlighted with LEAK (opens the full-size screenshot)

    The whole route in view

    Where the round stands, area by area: what’s done, what’s left, and what was found. Jump to any checkpoint, or skip one you can’t reach, with a reason.

The app on an iPhone 17. Sample data.

The iPad held sideways: the route in walk order on the left, with RW-1 and RW-2 done, and CF-2, Hypochlorite Feed, on the right with the feed pump On, SCADA agreeing, and a feed rate of 15.0 gallons an hour (opens the full-size screenshot)
The app on an iPad, held sideways. Sample data.

On the iPad, the route beside the sign

Held sideways, the iPad keeps the whole route beside the checkpoint you’re on. A shared control-room tablet shows a roster, and each operator unlocks it with their own PIN, so every reading says who took it.

On the App Store for iPhone and iPad, and on Google Play for Android. It signs in with the same account as the console, and anyone can look around on a practice route before signing in.

  • Download on the App Store
  • Get it on Google Play

In the console, the whole plant

Supervisors use the console in any browser at app.shiftrounds.com, with nothing to install. Today shows every round in the last 24 hours and what needs someone. Each round’s report is emailed to the people you choose when it reaches the server, and every reading builds a trend anyone can pull up.

A round's report in the console: Day Round in orange, who walked it and when, 1 leak and 1 SCADA mismatch, the drip at RW-2 with its open issue, and the clearwell's chlorine at 1.80 mg/L in the field against 2.20 on SCADA (opens the full-size screenshot)
A round’s report: the leak at RW-2 with its open issue, and a chlorine reading that didn’t match SCADA. Sample data.
  • Routes you build yourself

    A chief operator or supervisor sets the checkpoints, readings, limits and schedule, starting from checklists for pumps, filters, analyzers, lift stations and more. Each change goes to phones as soon as it’s saved: no developer, no app update.

  • A leak becomes an issue

    A leak or a fault found on a round opens an issue that a supervisor assigns and closes. ShiftRounds isn’t a work-order system; your maintenance system does the rest.

  • Records you can stand behind

    Every reading carries who took it, when, and when the server got it. A correction is a new entry, and the first one stays. How your data is kept safe

ChemLevel, at chemlevel.com

Works with ChemLevel

ChemLevel tracks a plant’s chemical tanks and chlorine cylinders and forecasts when to reorder. It’s made by the same team, and a utility that runs both can connect them.

Then a tank level or a cylinder’s weight read on a round is logged in ChemLevel once the operator moves on from that checkpoint, with whether the area’s tag was tapped. Nobody types it in twice.

Visit chemlevel.com

Hypochlorite day tank 11.9 in

Read on a ShiftRounds round at CF-2 by Dana Whitfield, 11:42 AM, tag tapped

Sodium Hypochlorite 11.9 in

Logged in ChemLevel, marked From ShiftRounds · Dana Whitfield

One reading, logged once. Sample data.
  1. Get a code in ChemLevel

    An administrator opens Settings, then ShiftRounds, in ChemLevel and gets a one-time code. The link needs ChemLevel’s Team plan.

  2. Enter it in the console

    An owner or chief operator types the code into the console’s ChemLevel page, and the two are connected.

  3. Match readings to tanks

    Choose which reading goes to which ChemLevel tank or cylinder scale. A corrected reading replaces the first one, and either side can disconnect.

Priced per plant

One plan, with every feature and room for everyone at the plant. Start free for 15 days, with no card to enter and no one to call first. Walk real rounds, then choose monthly or yearly before the trial ends.

Per plant

One plan, every feature

$129 a month

$1,290 a year, two months free

Start a free trial

Nothing is charged until you choose a plan.

Every plant gets

  • Any number of people, shared devices, routes and checkpoints
  • The app for iPhone, iPad and Android, and the console in any browser
  • Rounds that finish with no signal, and send when there is one
  • Each reading checked against your own limits as it’s typed
  • NFC tags, photos, skipped checkpoints and SCADA checks
  • Round reports and alerts, by email and on the phone, with quiet hours
  • Issues followed until they’re fixed, trends and round history
  • The ChemLevel link, for a utility on ChemLevel’s Team plan

Buying against a purchase order? We invoice public utilities on 30-day terms, monthly or yearly, and honor a sales tax exemption certificate. Prices don’t include sales tax, which is added where we collect it.

Ask about invoicing

When the trial ends, an owner or chief operator chooses monthly or yearly under Billing in the console. Without a plan, the utility becomes read-only, with everything recorded still there to read, and it’s deleted 30 days later; its owners and chief operators are emailed first. A lift station can be a checkpoint on a plant’s route rather than a plant of its own, and the sample plant a trial starts with isn’t counted. The Terms have the rest, and the FAQ answers what utilities ask first.

Try it on your next round

Sign up, set up your utility and a plant, and invite your operators. Drinking water, wastewater, lift station and distribution plants start from a route you can change, and every trial comes with a sample plant and a week of its rounds to look through.

Start a free trial

15 days free, with no card to enter. Then $129 a month per plant.

Your operators get the app from the App Store or Google Play, and sign in with the accounts you invite them to.